2000, Marlow-Hunter 450

Marlow-Hunter 4502000 Sale Pending

156000.00Jacksonville, FL

  • Year: 2000
  • Length: 45'
  • Price: 156000.00
  • Located in Jacksonville, FL
  • Hull Material: Fiberglass
  • Engine/Fuel Type: diesel
  • YW# 3962140

Hunter sailboats have remained extremely popular through the years, and one that remains of interest to today’s sailors is the 456. It’s a large, comfortable boat that’s easily managed by two and has all the creature comforts of home.
Design & Construction

The Hunter 456 is a moderate displacement design with a modern underbody featuring a bolted-on antimonial lead keel and a spade rudder. Construction was a standard vacuum-bagged infusion, but Hunter added extra strength by laminating a Kevlar reinforcement into the hull from the bow to the keel sump, where collisions are most likely to cause damage.

The hull-to-deck joint is an external flange, through-bolted on 8” centers and bonded with 3M 5200 on the seam. An extra bit of epoxy is added at the chainplates. A high-density vinyl rubrail is wrapped 360 degrees around the boat for added protection. That comes in handy when tying up to rough pilings, especially when wind and current are pushing at the boat during docking.

Cockpit, Deck & Rigging

Boarding from the dock or the dinghy is easy due to the low, wide swim-step and gradual steps up to deck level. Enormous transom hatches to port and starboard stow everything from lines, to fenders, to the AC cord, as well as creating nice seats for putting on snorkeling gear or chatting with those in the water.

Up top, the aft deck is expansive and with the removable cushion, makes a nice sunpad. The stainless-steel arch that Hunters are known for comes in handy for a variety of things beyond providing an attachment point for the traveler and allowing for end-boom sheeting. It also makes a great handhold that nearly spans the beam of the boat, and it holds a Bimini. The cockpit coaming is fairly low, which makes it easy to enter and exit the cockpit, and the pedestal has room for the installation of electronics. The instruments are forward along the offset companionway hatch, along with a halyard winch to starboard.

The decks are wide and clear and easy to negotiate all the way forward, where an opening anchor locker houses the windlass and lets the chain drop down quickly and easily without much worry about it piling up. The bow-roller protrudes quite a distance beyond the stem and pushes the anchor well away from both the roller furling and the bow.


Keel: Other


length Overall: 46.08 ft
Length Waterline: 39.67 ft
Max Draft: 5.50 ft
Displacement Measure: 26000.00 lb
Ballast Weight Measure: 9500.00 lb
Bridge Clearance Measure:63.00 ft
Beam Measure: 14.00 ft


Engine Brand:Yanmar
Year Built: 2000
Engine Model:4JH3-TE
Engine Type: Inboard
Engine/Fuel Type: diesel
Engine Power:55|horsepower


Fresh Water Tanks:1(200 Gallons)
Fuel Tanks: 1(100 Gallons)


Number of double berths:
Number of cabins: 2
Number of heads: 2

Raymarine 7212 Chartplotter Raytheon NAV 398 GPS at nav station 
Raytheon ST 7000+ AutopilotICOM IC M504 VHF at nav station
ICOM Commandmic RAM ST 60 Data WEMA tank monitor
MarineAir Systems AC
Xantrex Digital Echo Charger for Lithium 2021 Freedom SW 3012 charger 2021 Relion Lithium Ion batteries RB300 300 Ah x 2
3 burner with oven propane stove Grunert refrigeration  Double sink
Autopro stereo with blu-ray player Jensen 32? tv
2022 - All new running rigging 
Dual bow roller Simpson Lawrence Horizon 1500 windlass CQR primary Danforth secondary
Full cockpit enclosure with Eising glass, screens and covers New wave Guardian 6 man Liferaft Dinghy and outboard Davit system with solar capability

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.